Encore sitdown User Manual Download Page 4 | Manualshive

Page: 4 / 28

background image

4 |

Encore 18x6

Sitdown Model User Guide

Warranty

We believe that we have designed and are manufacturing the best long arm quilting
machine available.

As you unpack your machine, be sure to keep the box and

packing materials designed to protect the machine during shipping. Should
it become necessary for you to return the machine for warranty work, please
call us for specific instructions for packing and shipping your machine.

• Your

Encore 18x6

Sitdown has a full labor warranty for one year from the day you

receive your machine. We guarantee the machine parts for five years.

• The machine must be cleaned and oiled regularly according to the instructions in this

manual. Failure to properly maintain the machine will void this warranty.

• Your

Encore 18x6

Sitdown must be plugged into a surge-protected electrical outlet. We

highly recommend using an Uninterrupted Power Supply (UPS) also known as a Battery

Backup. This helps to ensure that you are getting a regulated 110 volts into your

machine. (See photo below of UPS battery backup.)

• Should we mutually decide that your machine cannot be repaired using normal

communications, we will arrange for the machine to be returned to the factory.

Should You Have a Problem

Please contact the dealer where you purchased your machine. They are also your
servicing dealership.

«
...
2
3
4
5
6
...
»

Summary of Contents for sitdown





























Reviews:

No comments

Related manuals for sitdown

2 Line KX-TG9541C

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 88

Brand: Marq Pages: 24

Brand: T-COM Pages: 6

Brand: Sunny Pages: 7

Brand: Singer Pages: 13

Brand: Janome Pages: 115

Brand: IPC Soteco Pages: 40

Brand: Nacecare Pages: 4

Brand: JUKI Pages: 56

Brand: SunStar Pages: 66

WRANGLER 2016 AE

Brand: NSS Pages: 20

THERM-O-FLOW T7 Series

Brand: Graco Pages: 50

Brand: BT Pages: 73

Brand: BT Pages: 86

Brand: LOBSTER Pages: 8

Ultralock 14U 34B/234B

Brand: Singer Pages: 60

Brand: Singer Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands