background image

IDENTIFYING EXTERNAL COMPONENTS 

LED  

Link 

‹

 

The Link LED indicator lighted green when the ENPWI-NX2 Wireless 

802.11n CardBus Adapter is connected to wireless network successfully.  

ACT (Activity) 

‹

 

The ACT LED indicator blinking green when the ENPWI-NX2 Wireless 

802.11n CardBus Adapter is transmitting or receiving data. 

Check the installation 

The LEDs of the ENPWI-NX2 Wireless 802.11n CardBus Adapter are clearly 
visible and the status of the network link can be seen instantly: 
1.

 

Once the device is plugged to the station’s PCMCIA slot, the LED of the 
ENPWI-NX2 Wireless 802.11n CardBus Adapter will light up indicating a 
normal status. 

2.

 

When the device plugged to the station’s PCMCIA slot and the driver was 
installed, the ACT will start alternate blinking, it means that the device is starting 
to scan the wireless devices near the ENPWI-NX2 Wireless 802.11n CardBus 
Adapter. 

3.

 

While the ENPWI-NX2 Wireless 802.11n CardBus Adapter linked up and 
transmitting data to the Access Point or to other Wireless LAN station, the Link 
LED will lighted green. 

 

Summary of Contents for ENPWI-NX2























Reviews: