ENHWI-3GN3 User’s Manual
www.encore-usa.com
19
This is the last screen from the Smart Wizard. The next few setup screens will be brought up
using your default web browser (Internet Explorer, FireFox, etc). You will be prompted to enter a
username and password, the default is “admin” for both. You can change this default username
and password to your own later on. Take time and follow and read the screen selections and
instructions carefully. If you are in doubt you can contact our 24-hour tech support anytime.
Click
to continue. You will now be redirected to the device’s web interface.
Error Opening the page!
f you see this message, it is most likely that your computer is not set to receive an IP Address
automatically which is required by the Smart Wizard, or your computer has a static IP address
assigned which is different from the ENHWI-3GN3 IP address range. It can also be a problem
from the computer, Ethernet cable being used or your default web browser. Try to restart your
computer and try running the Smart Wizard again. If problem persist have a qualified computer
technician or someone who is knowledgeable with computer networking check your computer
and network settings.