5.1.3 ADSL LED
The
ADSL LED
on the front panel does not light up.
STEPS
CORRECTIVE ACTION
1
Check the telephone wire and connections between the router ADSL port and the wall
jack.
2
Make sure that the telephone company has checked your phone line and set it up for
ADSL service.
3
Reset your ADSL line to reinitialize your link to the DSLAM.
4
If these steps fail to correct the problem, contact your local distributor for assistance.
5.2 Problems with the Web Interface
I cannot access the web Interface.
STEPS
CORRECTIVE ACTION
1
Make sure you are using the correct IP address of the router. Check the IP address of
the router.
2
Make sure that there is not a console session running.
3
Check that you have enabled web service access. If you have configured a secured
client IP address, your computer’s IP address must match it. Refer to the chapter on
remote management for details.
4
For WAN access, you must configure remote management to allow server access from
the WAN (or all).
5
Your computer’s and the router’s IP addresses must be on the same subnet for LAN
access.
6
If you changed the router’s LAN IP address, then enter the new one as the URL.
7
Remove any filters in LAN or WAN that block web service.
The web Interface does not display properly.
STEPS
CORRECTIVE ACTION
1
Make sure you are using Internet Explorer 5.0 and later versions.
2
Delete the temporary web files and log in again.
In Internet Explorer, click
Tools
,
Internet Options
and then click the
Delete Files ...
button.
When a
Delete Files
window displays, select
Delete all offline content
and click
OK
.
(Steps may vary depending on the version of your Internet browser.)
76