Please follow below steps to set your IP Filter:
1.
IP Filter Set Editing
:
Choose your
IP Filter Set Index
, Interface and Direction options.
Remember, Interface and Direction functions are affected with IP Filter Set Index
. EX: if
your 1
st
index set of IP filter set PVC0 as Interface and Outgoing as Direction, so the list of
1
st
IP Filter will be PVC0 and Outgoing as their settings.
2.
IP Filter Rule Editing:
Select the
IP Filter Rule Index
(up to 6 numbers for each set index)
and choose
Active
option. As below example,
Source IP Address
is 192.168.1.4,
Subnet Mask
is 255.255.255.255,
Destination IP Address
&
Subnet Mask
is 0.0.0.0,
Port Number
is 80. And,
Protocol
sets TCP. From this setting, it filters 192.168.1.14, so it
cannot access the web.
Notice
, each IP Filter Set Index can has up to 6 filters IP. At “
Rule
Unmatched
” option, you must choose
NEXT
until the last filter IP choose
Forward
.
3. After every setting is done, click
SAVE
to continue next IP Filter Editing.
62
