E9 OP REV.A1
10
Press and hold
F
button of LCD remote until 2 beeps sound , release and re-press
F
button the LCD
remote will show
“CH 6” icon flash
, then press
button
to activate channel 6 function.
Channel 6 is user-programmable timer output. You may program the built-in timer to send a ground signal for any
time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight,
power window or sunroof. (Factory defaults setting at momentary output.)
U. POWER SAVER MODE (Default OFF) * See advanced user mode
Under Menu mode press
button while
“POWER SAVE”
icon flash, press
button Power save ON,
while the power save mode, the LCD remote transceiver use “0” current to save the battery power. Press
button Power save OFF
Exit: Press any button of the LCD remote transmitter to exit “Power Save Mode”.
V. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the
power is lost and then reconnected.
W. SECOND VEHICLE SECURITY OPERATION:
Your 4-button remote transmitter can be utilized to control a second vehicles security system, To program the
remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
* For the standard
1 way Transmitter by press button
+
is shift button.
Standard Transmitter
1. Prior to pushing any button on the transmitter. Press
button
+
first on the transmitter.
2. Once
button
+
is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the
second transmitter pin code has built-in.
3.
While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle
security system.
For LCD transceiver – 2
nd
car operation :
* See advanced user mode
a. Press and hold
F
button of LCD remote for 1 second until 2 beeps sound and then release the
F
button.
b. The text
will flash on the LCD screen, press
button to enter the menu.
c. Press
or button to move up or down in the menu, find CAR SELECT on the menu.
d. Press
button to select the option you would like to adjust CAR 1 or CAR 2 for further operation.
Caution: If the LCD transmitter does not function. Please insure it is set to operate car #1
X. Clear the Flash Icon and Melody Sound:
The Transmitter will reset the flashing icons the
next time the Ignition is cycled to the ON position
.
Y. Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will alert the user
through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop
melody sound
only.
Z. Vibration / Melody Mode:
(see advanced users menu for more info)
Press and hold the
F
button until 2 beeps are heard. You will see the word
.Press the trunk button
to scroll through the menu. Scroll to the word “
Vibrate”. When you see the word “Buzzer
Vibrate”, press the trunk button once to enter programming. Press the
button to change the setting.
(Buzzer, BZ VIB, Vibrate). Once a setting is chosen. Press the
button to confirm.
WARNINGS:
As with any product that performs automatic functions, there are certain safety
precautions that you must practice and be aware of.
