background image

E3 IN REV. A   

11

3. Press and hold 

  button for 2 seconds. One long siren chirp will indicate the unit is ready to accept adjustments 

of the shock sensor. 

4. Press   button on the transmitter once. This will 

decrease

 sensitivity level by one. Each time the button is 

pushed and a decrease is made the siren/horn chirp will respond with [1] chirp. Two chirps indicate the minimum 
sensitivity. Warn away & full trigger will be deleted when minimum sensitivity is selected 

5. Press    button on the transmitter once. This will increase sensitivity level by one. Each time an increase is made 

the siren/horn chirp will respond with [1] chirp. Two chirps indicate the maximum sensitivity. 

6.  Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor.   

a). Activate the warn-away (first stage the shock sensor), the siren will                 emit a short chirp. 
b). Activate the full alarm (second stage the shock sensor), the siren will emit a long chirp. 

7. When you are satisfied with the setting, press the 

  button to lock in the adjustment. One long siren chirp will 

indicate the unit has locked in the adjustment. 

Note: If 30 seconds of inactivity expires or you turn ON the ignition during of above steps, the unit will exit the program 

mode and return to the disarmed mode. Three long chirps will confirm exit.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

ENCORE LIMITED LIFETIME WARRANTY PROVISIONS 

( U.S. ,Continental U.S. and Canada Only) 

 

1.

 

Encore Automotive Systems LLC. WARRANTS that this new unit has been thoroughly inspected 
and tested at the factory prior to delivery.    Your Encore equipment is guaranteed for “life” to the 
original purchaser/user of the equipment and the original vehicle in which it was installed by an 
authorized installer under the following conditions: If the product proves defective (according to 
Encore’s testing) within the first year, the defective unit may be exchanged or repaired free of charge.   
“Proof of Purchase” (dated sales receipt) must accompany all warranty returns; 

otherwise, your 

return will be rejected and sent back.

 After one (1) year, the purchaser should ship the unit prepaid 

to Encore with a money order in the amount of $30.00 to cover shipping and handling charges.  

Note:

 The product needs to be registered online at time of installation. To register this product go to,   

www.encoresautomotivesystems.com

 .   

 

2.

 

Exclusion to the Limited Lifetime Warranty Provision: All two-way LCD and two-way OLED remote 
transceivers are excluded from the Limited Lifetime Warranty noted in paragraph no.1. All two-way 
LCD and two-way OLED remote transceivers are guaranteed to the original purchaser for a period of 
one year from date of purchase. If the product proves to be defective within the first year, the 
defective unit may be exchanged or repaired free of charge. All other provisions stated on this card 
apply. 

 

3.

 

This WARRANTY will be considered void if the equipment has been misused, neglected, improperly 

Summary of Contents for E 3














Reviews: