![background image](http://html.mh-extra.com/html/encore/e-3/e-3_installation-manual_2406088010.webp)
E3 IN REV. A
10
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
Pathway
Illumination
Feature “off”
Parking light
turns “on” for
30- second
upon an unlock
signal
Parking light
turns “on” for 30-
second upon an
unlock signal &
10-second upon
a lock signal.
2
Ignition
controlled door
locks & unlocks
Ignition
controlled door
locks only
Ignition controlled
door unlocks only
Without ignition
controlled door
locks & unlocks
3
0.8 second door
lock & unlock
3.5-second Door
lock pulse.
Double pulse
unlock
Comfort feature
4
3
rd
Channel
(Trunk) output
3
rd
Channel
Latch output
Gray wire = Two
step door unlock
output
5
+
Button =
Silent Arm/Disarm
Button = 4
th
Channel Aux.
6.
+
Horn chirp Duration
Standard
Horn chirp
Duration
50 mS
Horn chirp
Duration
30 mS
Horn chirp
duration
10 mS
Exit:
Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
Comfort Feature:
Some Vehicles have a special “COMFORT feature”. When you lock the door with the key, you can keep turning the
key in the door for about 5 to 7 seconds and the window will close directly. If your vehicle has the “COMFORT
feature” and you wish for the door to be locked and the window to be closed automatically at the same time by remote
control, you can set the alarm feature “
B-3
“with comfort feature”.
Shock Sensor Adjustment:
1
Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in
OFF
position.
2
Push the Valet switch
5
times and hold in on the
5th
push. When a long chirp is heard, release the valet switch.
You are now in the Alarm feature ‘III’ programming mode.
3
Press the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
1
Shock Sensor Program
Mode
Exit:
Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit
ADJUST AND TEST THE SENSITIVITY LEVEL OF THE SHOCK SENSOR
1. Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in
OFF
position.
2. Push the Valet switch 5 times holding in on the 5th push. a long chirp will be heard. Release the valet switch. You
are now in the Alarm feature ‘Shock Sensor’ programming mode.
Summary of Contents for E 3
Page 3: ...E3 IN REV A 3 INSTALLATION DIAGRAM ...
Page 13: ...E3 IN REV A 13 Notes ...