.06.
there are any damages or severe scratch.
·
Make sure the fixture is operated by qualified personnel who knows the fixture
before using.
·
Keep the original packages if any second shipment is needed.
·
Don’t tr y to change the fixtures without any instruction by the manufacturer or
the appointed repairing agencies.
·
It is not in warranty range if there are any malfunctions from not following the
user manual to operate or any illegal operation, like shock short circuit, electronic
shock , lamp broke, etc.
Cautions:
For added protection mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondar y safety attachment, such
as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or ser vicing the
fixture.
from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture
is kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injur y in the event the clamp fails.
Mounting points:
Overhead mounting requires extensive experience, including
amongst others calculating working load limits, a fine knowledge of the installation
material being used, and periodic safety inspection of all installation material and
the fixture. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injur y.
Be sure to complete all rigging and installation procedures before connecting the
main power cord to the appropriate wall outlet.
INSTALLATIONS
6
MENU OPERATIONS
8
.09.
MIC
LCD DISPLAY
MENU
Up
Enter
Down
M
E
N
U
A001~AXXX
CH14 MODE
CH16 MODE
Yes/No
ArtNet to DMX (On/Off)
Device IP Addr:XXX.XXX.XXX.XXX
Ctrl IP Addr:XXX.XXX.XXX.XXX
Universe:0-255
Protocol Set:Kling-Net /ArtNet(Default)
Reverse PAN (On/Off)
Reverse TILT (On/Off)
Select Pan 630°/540°/360°
Select Tilt 270°/180°/90°
Internal Program1~8 Master/Alone
Internal Program1~8 Master/Alone
Dmx Address
Channel Mode
Auto Run
Music Control
Reset Default
Ethernet Set
Reverse Pan/Tilt
Temperature
Software Version
Reset
UI SET
Function Mode
Option
Information
Manual Control
ADVANCED
(Access Code 088)
M
E
N
U
MIC sensitivity 0~99%
OFF Signal Mode (On/Off)
XXX°C/°F
V1.0~9.9V
Total Reset
Pan/Tilt Reset
Color Reset
Gobo Reset
The Others Reset
PAN=XXX......
Pan=XXX......
DMX address setting
Ch13 MODE
CH15 MODE
Aurto run
Sound Control
Reset Default
Enabled ArtNet to DMX
Device IP Address Setting
Ctrl IP Address Setting
ArtNet Protocol prot Setting
Ethernet Protocol Selection
Reverse Pan
Reverse Tilt
Select Pan
Mic Sensitivity
Signal Mode
Current Temperature
Software Version
Total Reset
Pan/Tilt Reset
Color Reset
Gobo Reset
Select Tilt
The Others Rese
t
Channel Control
Calibration
Channel
Calibration
