background image

.05.

PHOTOMETRIC DATA

4

OPERATION INSTRUCTIONS

5

· 

 

The 

 is for beam effect for on-site decoration purpose.

· 

 

Don’t turn on the fixture if it’s been through severe temperature difference like 

after transportation because it might damage the light due to the environment 

changes. So make sure to operate the fixture until it is in normal temperature.

· 

 

This light should be keep away from strong shaking during any transportation or 

movement.

· 

 

Don’t pull up the light by only the head, or it might cause damages to the 

mechanical parts.

· 

 

Don’t expose the fixture in overheat, moisture or environment with too much dust 

when installing it.  And don’t lay any power cables on the floor. Or it might cause 

electronic shock to the people. 

· 

 

Make sure the installation place is in good safety condition before installing the 

fixture.

· 

 

Make sure to put the safety chain and check whether the screws are screwed 

properly when installing the fixture.

· 

 

Make sure the lens are in good condition. It’s recommended to replace the units if 

AuraSpot™150 LED

ø 0.47 / ø 1.54

ø 0.94

 

/ ø 3.08

ø 

3.04

 / ø 

9.97

Beam Diameter

(m/ft)

ø 1.42 / ø 4.66

1

3.2

°

Beam Angle  LUX   0.0929=FC

×

Photometric Beam Angle Data

0m

2302

 / 

24790

13.2

°

2.5m(8.2ft)

5m(16.4ft)

7.5m(24.6ft)

10m(32.8ft)

( FC/LUX )

573

 / 

6170

280

 / 

3020

177

 / 

1910

DMX CHANNELS

9

0-255

0-255

0-255

0-255

0-15

16-31

32-47 

48-63

64-79

80-95

96-111

112-127

128-189

190-193

194-255

0-9

10-19

20-29

30-39

40-49

50-59

60-69

70-89

90-109

110-129

130-149

150-169

170-189

190-255

0-3

4-127

128-131

132-255

0-9

10-19

20-29

30-39

40-49

PAN Movement

Fine control of Pan movement

Tilt Movement

Fine control of Tilt movement

Open / white

Color 1

Color 2

Color 3

Color 4

Color 5

Color 6

Color 7

Forwards rainbow effect from fast to slow

Color rotation stop

Backwards rainbow effect from slow to fast

Open

Gobo 1 

Gobo 2

Gobo 3

Gobo 4

Gobo 5

Gobo 6

Gobo 1 shake slow to fast

Gobo 2 shake slow to fast

Gobo 3 shake slow to fast

Gobo 4 shake slow to fast

Gobo 5 shake slow to fast

Gobo 6 shake slow to fast

Rot. gobo wheel cont. rotation slow to fast 

No function

Forwards gobo rotation from fast to slow

Gobo rotation stop

Backwards gobo rotation from slow to fast

Open

Gobo 1 

Gobo 2

Gobo 3

Gobo 4

Mode/Channel 

Function 

Values 

Description

DE

1

2

3

4

5

6

7

8

16B

1

2

3

4

5

6

7

8

Pan

Pan-fine

Tilt

Tile-fine

Color 

wheel

Gobo 

wheel 1

Gobo1  

rotation

Gobo 

wheel 2

.10.

Summary of Contents for AuraSpot 150 LED









Reviews: