Harmony SBX Remote I/O Network Monitoring & Control User Manual
17
SCHEDULE
This screen allows you to set up schedules that are stored on the SBX Remote internal memory. Schedules are
essentially routines of operation that allow the SBX to perform tasks for a specified period of time.
The functions of the scheduler screen are described as follows:
Ø
Modify
Select this option to begin changing schedule settings. This enables the association of specific schedules with
a given day, as well as the configuration of their start and stop times. To set up a schedule:
1.
Select a
time group
(i.e., “A”). This will activate the
Event
checkboxes:
2.
Place a check mark in the
Event
number that is to be used. This will enable the
Start
/
Stop
time to be
added for the event. Select the desired start/stop time for the event using .
3.
Add the new event to the calendar by clicking on the days that the event is to occur on.
Ø
Wizard
The Scheduler Wizard allows more custom schedules to be set in your SBX. See Appendix C for more details.
Ø
Import
Click
Import
to load a pre-saved schedule into your SBX. You will be presented with a screen that helps you
find the schedule file on your computer’s hard drive.
Ø
Export
Click
Export
to export your schedule setup into a file to import into your SBX later.
These boxes are
grayed out until a
time group is
selected.
Time Groups
1
2
3
