Harmony SBX Remote I/O Network Monitoring & Control User Manual
9
LED INDICATORS
There are seven LED indicators on your SBX Remote
I/O radio as follows:
Ø
Power:
Indicates if the radio is powered ON.
Ø
RF Link:
Indicates if the SBX Remote radio has established
a system link and is communicating with a
gateway (master) device. There are two modes of
behavior that the RF LED will display based on the
connection between the SBX Remote and a
master device (Gateway Basic, Gateway
Advanced I/O, Gateway E-Lite 450 or IP I/O8):
§
LED stays ON
: If the RF Link LED stays on,
then the SBX Remote can communicate
reliably with another Harmony device.
§
LED blinking
: If the RF Link LED is blinking,
there is an issue blocking communication
between the SBX Remote and your
Harmony gateway/master device.
Ø
Schedule Activated:
Indicates when a schedule is actively running.
§
LED ON
: Outputs are running according to
the assigned time plan.
§
LED OFF
: No schedule assigned to this unit;
all outputs are used for real time control.
§
LED blinking
: Schedule is assigned to the
unit, but it is currently under ‘
override’
condition. An override is an ‘
exception
’ to
an existing schedule (ex. public holiday)
Ø
Input 1 / Input 2:
Indicates the status of each of the 2 inputs. The
LED for an activated input will be ON.
Ø
Output 1 / Output 2:
Indicates the status of each of the 2 outputs.
The LED for an activated output will be ON.
