ASSEMBLY AND INSTALLATION INSTRUCTIONS for PR16a – PR16b – PR16c
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 –3/8” x ½” Button Head Screws
2 –3/8” x 1 ¼” Button Head Screws
2 – 3/8” Nuts
2 – Ceiling Screw Hooks
2 – 5” Extension Hooks
1 – 7/32” Allen Wrench
Toggle Kit
Components included:
1 – Oval Base
1 – Rolled End Bar
4 – Arms
18 – Angled Pot Hooks – 6 Straight Hooks – 60” Rack
12 – Angled Pot Hooks – 6 Straight Hooks – 48” Rack
6 – Angled Pot Hooks – 6 Straight Hooks – 36” Rack
If you have also purchased a grid (may be sold and packaged separately) you will also have received:
1 Grid 6 Pot Hooks 6 Grid Brackets
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Grid Assembly
(if you have not purchased a grid, please continue on to the rack assembly instructions).
1)
Slip the 6 grid brackets over the oval base with the “L” portion pointing to the inside. Center one bracket on each end and on the
inside of each arm.
2)
Place the grid on the brackets. You are now ready to assemble your rack.
3)
Hang your pot hooks from the interior squares only.
Do not
hang them from the perimeter or the cut portions of the grid.
Distribute your cookware evenly.
4)
The grid has been treated with a finish which will resist corrosion and tarnish. It can be cleaned with a damp cloth and dried
thoroughly. Please do not use abrasive cleaners.
Rack Assembly
1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting.
2)
Attach the arms to the outside of the oval using the four shorter button head screws, leaving them loose.
3)
Attach the rolled end bar to the top of the arms using the two longer button head screws and the two nuts. Insert the extension
hooks into the holes in the rolled bar.
4)
Square up the arms and tighten all the screws with the allen wrench. The assembly is now complete.
5)
We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the
rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack
directly into wood joists you may use the new-technology DRYWALL anchors enclosed with your rack. The steel anchors are
very strong and when installed in drywall will hold 200 lbs. each. Two anchors hold about 400 lbs. Follow the instructions in
the Toggler kit.
6)
Hang your heavier items on the straight portion of the rack between the hanging arms or from the upper rolled end bar between
the extension hooks.
7)
All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is
easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax
product.
8)
The care and cleaning of our copper and brass units must be done with a low abrasive cleaner such as “Flitz”. Chrome racks are
best cleaned with a good quality glass cleaner like “Windex”. Our high quality plating will age & tarnish the same as solid
material. A periodic cleaning will restore your rack to its original brilliance.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
::
potracks
.
com
Call 1-800-667-8721 anywhere in the US and Canada -
www.kitchen
source
.com
::
potracks
.
com
.
com
