ASSEMBLY AND INSTALLATION INSTRUCTIONS for LR13
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4-3/8” x 5/8" Button head Screws
4- Hard Glides
1- 7/32” Allen Wrench
Components included:
2-Legs
2- Upright Supports
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Slip the hard glides over the ends of the legs.
2) Place the upright supports on top of and perpendicular to the legs. Using the Allen wrench and the four 3/8” x 5/8" button head
screws, attach the legs and the uprights together. The screws should be inserted from the top down toward the floor. Tighten the
screws only finger tight.
3) Square - up rack and tighten all screws firmly.
4) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is
easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax
product.
It is important that your rack is assembled correctly. If the unit is assembled or used incorrectly, it
could become unstable and collapse, possibly causing injury.
WARNING
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone 360-385-6100
•
Fax 360-385-6156
NorthlineExpress.com
www.NorthlineExpress.com
Toll-Free
Toll-Free
1-
877-734-2458
NorthlineExpress.com
www.NorthlineExpress.com
