** PLEASE TURN THIS INSTRUCTION OVER **
DR23 Décor Compact Scroll Rack
PAGE 2
ASSEMBLY INSTRUCTIONS
, continued
.
8) Place your assembled rack on a level surface and square it up. The arms need to be at right angles to the hang bar and
the side bars. Then with a hex key wrench firmly tighten the lower part of the arms to the oval body and tighten the
the arm scrolls onto the lower side bars. Finally, using hex key wrenches on both sides of the barrel bolt, firmly tighten
each arm pair around the upper hang bar.
INSTALLATION and USE INSTRUCTIONS
1)
If you are attaching your rack to the solid wood of ceiling joists or beams: please carefully measure the area where
the rack is to be hung and install the enclosed ceiling screw hooks.
2) If you are mounting in a ceiling of drywall: please use the Toggle kit provided for an easy, quick and solid mounting.
Directions for inserting the two Toggle hangers are included in the Toggle kit and not repeated here.
3) Insert one end of one chain into one of the ceiling screw hooks. Place one end of one "S" hook into the other end of
the chain. Repeat this for the chain and “S” hook at the other end of the rack.
4) Carefully lift your rack into place and attach the two top holes in the upper hang bar to the two “S” hooks at the
lower end of the two chains.
7) Note: Use of the hanging chains is optional; you may choose to not use it and thus raise your rack another six inches.
8)
Time to enjoy your new cookware rack!
Please take care to distribute and balance heavier items around the rack.
9) All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack.
Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. Touch-up with a commercial wax product.
It is important that your rack is assembled correctly. If assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty:
This product is warranted to be free of defects in material or workmanship for a period of five years from the date of your
purchase. Your exclusive remedy shall be the repair or replacement of the defective product, and shall be subject to the following conditions: (1) you
provide notice of any defect to Enclume within the warranty period, and (2) you return the defective product to Enclume Design Products, Inc.( 24
Colwell St., Port Hadlock, WA 98339),
postage prepaid
within
20
days of obtaining a return authorization number from Enclume (which may be
obtained by telephoning the number at the bottom of this instructions). There are no other warranties, expressed or implied, applicable to this product.
FURTHER, THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME
SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE
OR USE OF THIS PRODUCT
.
