20
21
u
sing
a
Crobat
lCD
Adjusting the White Balance with the Camera
The following directions can be used to adjust
the White Balance from the Camera:
1. Press and hold the Mode button for 3
seconds to “Entering Setup” Menu.
2. Press the + to scroll to “2. White Balance”.
3. Press the Mode button to initiate the White
Balance feature.
4. Press the +/- to scroll through the four
settings.
5. Press the Mode button to exit this feature.
Figure 1
ENTERING SETUP
2.White Balance
1.WHT BAL AUTO
2.WHT BAL WARM
3.WHT BAL NORMAL
4.WHT BAL COOL
1 3 5
2
4
u
sing
a
Crobat
lCD
Figure 1
3
2
1 4
Using Line Markers with the Remote control
Line Markers are used to frame an image between two horizontal lines.
These lines may be used as a reading guide for long passages of text, as
a guide to help keep your place as you move from one side of the page
to the other, or just to make writing easier.
The following directions can be used to add/remove Line Markers with
the Remote:
1. Press and hold the Line Markers On/Off (“LM ON/OFF”) button for at
least 1 second.
2. To move the Upper Line Marker press the “ULM+/-” buttons.
3. To move the Lower Line Marker press the “LLM+/-” buttons.
4. To remove Line Markers press and hold the “LM ON/OFF” button for
at least 1 second.
Summary of Contents for Acrobat LCD
Page 1: ...Users Manual TM...
