Enarco CRENA 22, Instruction Manual

Page: 157 / 216

REVERSIBLE VIBRATORY PLATE COMPACTOR
11
CRENA 52*, 63*
en
The vibratory plate is driven by four-stroke single-cylinder engine. The most frequently used engine are
gasoline engines HONDA and diesel engines HATZ. The engine is coupled to the vibrator by a drive belt.
Centrifugal clutch mounted on the engine shaft disconnects power transmission at idle speed of the engine.
The operator is controlling the plate by a resiliently mounted and tilting control bar, where travel control lever
and throttle lever are located. In the case of electronically controlled engine is replaced by the switch lever of
gas idling and working speed.
3.1 BASIC TECHNICAL PARAMETERS
MODEL
DIMENSIONS (mm)
B H h h1 L I
CRENA 52 600 1055 840 1150 1420 895
CRENA 52H 600 1055 875 1150 1420 895
CRENA 63 750 1040 850 1130 1500 900
CRENA 63H 750 1040 910 1130 1500 900
TYPE CRENA 52 CRENA 63
Model CRENA 52 CRENA 52H CRENA 63 CRENA 63H
Weight kg 330 (340) 340 (350) 430 (440) 440 (460)
Frecuency Hz 75 75 70 70
Centrifugal Force kN 52 52 63 63
Maximun speed.
(forward/backward *)
m/min 22 22 20 20
Maximum Climbing Ability % 30 30 30 30
Vibratory Plate Width mm 600 600 750 750
Vibratory Plate Lenght Mm 895 895 900 900
Engine - HONDA HATZ HONDA HATZ
Model - GX270 1B30 GX390 1B50
Fuel - petrol diesel petrol diesel
Net power/3600rpm kW 6.3 5.0 8.7 7.9
Starting -
manual
(electronic)
manual
(electronic)
manual
(electronic)
manual
(electronic)
* specified speed is valid for optimal conditions
– difference of the fwd/rew speed up to ±15%.
Actual power of the engine mounted on a specific machine may differ due to various factors, as i.e. operational
speed, operational conditions, maintenance and other variables.
Operational speed of the engine is NOT the same as rated speed of the engine; they are preset to suit
technological parameters of the machine.