DOUBLE POWER TROWELS TIFON908
en
12
CLEANUP
NEVER allow concrete to harden on the power trowel.Immediately after use, wash any concrete off your
trowel with water. Be careful not to spray water on the engine. And old paintbrush or broom may help
loosen any concrete that has started to burden.
Coat the blades and blade arms with diesel fuel after cleaning. This should help prevent rusting and allow
for easier cleanup in the future. Maintenance (service, adjustment and repair)
NOTE: See the engine manual supplied with your machine for appropriate engine maintenance schedule.
There is a “Daily Preparation Check List” at the end of this manual. Please feel free to make copies of it and
use it on a daily basis.
MAINTENANCE SCHEDULE
Daily (8-10 Hours)
Check the gearbox oil lever daily
Check the fluid levers in the engine and gearbox
Weekly (50-60 Hours)
Check the connect link control for loose
Relubrication arms, thrust collar and clutch. Replace the blades if necessary.
Check and clean or replace the engine air filter as necessary.
Monthly (100-200 Hours)
Remove, clean, reinstall and relubrication the arms, thrust collar and clutch.
Adjust the blade arms.
Yearly (200-2500 Hours)
Check and replace if necessary the arm bushings, thrust collar bushing, shaft seals and belt. Check pitch
control cable for wear.
