en
7 MAINTENANCE
7.1 MAINTENANCE CALENDAR
7.1.1.
Daily maintenance:
A.- Remove the mud, dirt, etc., from the machine.
B.- Clean the underside of the vibrating plate.
C.- Inspect the air filter and clean it if necessary
D.- Inspect oil level of engine
E.- Inspect all the nuts and bolts and tighten them up as necessary
7.1.2.
Weekly maintenance:
A.- Clean the air filter (see point 7.3).
B.- Inspect the dampeners.
C.- Inspect exciter liquid.
NOTE: When the engine is new, the first oil change must be carried out after 20 hours’
work.
7.1.3.
Monthly maintenance:
A.- Change engine oil.
B.- Inspect and clean spark plug (see point 7.2).
C.- Clean sediment lid.
D.- Inspect and adjust V-belt (see point 7.8)
7.1.4.
Yearly maintenance:
A.- Check and adjust the valve clearance
B.- Change exciter liquid
7.1.5.
Storage:
(When the plate is stored for long periods of time)
A.- Completely empty the fuel from the tank, the fuel pipe and the carburettor
B.- Remove the spark plug and pour a few drops of engine oil into the cylinder. Turn the
engine several times by hand for the oil to spread over the surface inside the cylinder.
C.- Clean the outer surface of the machine with a cloth soaked in oil. Cover the unit and
keep it out of the damp and in a dust-free environment
VIBRATING PLATES
14
PEN10B-PEN13C-PEN16C-PEN16D
