Enabling Devices 2296, Manual

Page: 6 / 10

First pick the location where the Bubble Column will be placed. Next take the wall mount
bracket and place it over the top of the Bubble Column. The height placement should be
where the inside ring lines up with the bottom of the Bubble Column’s tube cap. Mark
your two holes for drilling the wall mounting screw anchors. Use a 3/16
th
size drill bit for
the holes. Next tap in the two wall plugs into the wall with the back of a screwdriver or a
hammer. Tap lightly as to prevent damage to the wall. Secure with screws. See photos
below.
Please Note:
Using the wall anchor is no substitute for adult supervision, especially when young
children are around the Bubble Column.
Page No.5