Test Procedure:
Before filling the Bubble Tube all the way the following test procedure should be done
for water tightness is recommended.
Fill the Bubble Tube up with about 3 cups of distilled water. Be careful not to spill water
during this process. Inspect the base for any leakage. If no water leakage is apparent
proceed to step #4. If there is water leaking from the base double check all connections
from step #2.
Note:
The Bubble Column is not designed for outdoor setup. For best results place the
Bubble Column in a location that is away from direct sunlight or a bright light source.
Supply Power to the Bubble Column:
Plug the AC Wall Transformer into the base and into any standard wall outlet.
Wall Anchor:
We recommend that you use the included wall anchor to help secure the Bubble
Column for safety reasons. There are two ways the anchor can be used. One up
against a flat wall surface, or it can be used to corner mount against two walls. The
included mounting hardware is meant to be used for sheetrock/drywall. If you have
other wall surfaces such as wood or concrete block consult your building maintenance,
contractor or hardware store associate for the proper mounting hardware.
Page No.4
Summary of Contents for 2296
Page 3: ...Page No 2 ...
Page 9: ...Page No 7 ...
