Fig.5
6.
Do not force or try adjusting the arm without first loosening the set knobs for
that portion of the arm. Each section of the arm has a set knob. Once you have
the arm in the desired position you can tighten the knobs to lock the arm in
place.
Please Note:
Maximum weight for this mounting system is 3 lbs.
Caution:
Do not over tighten the adjusting knobs, or try to move or adjust the mounting
system after you have tightened the adjusting knobs. Doing so can damage the
Mounting System and void your warranty.
Care of Unit:
The Mounting System can be wiped clean with any mild household multi-purpose
cleaner and disinfectant.
Do not use abrasive cleaners
, as they will scratch the
surface of the unit.
Rev 2/28/12
Mount for easy use of your tablets!
We have the perfect tablet holder. It’s great for the person who needs special
physical placement. The mounting system easily attaches to a wheelchair, tabletop,
bedrail or tray. Holder is compatible with most tablets and e book readers including
the Kindle, Kindle Fire, Nook, Motorola Xoom, Samsung Galaxy Tablet, Asus
Transformer and similar tablets. It comes with a set of six legs; they are different
sizes to allow for different sized tablets. Pick what fits yours best. Holder size: 6 ¾ "
L x 4 ¾ " W x 3 ½ "H. Mounting arm expands from 14 ½" to 24"L. Weight: 2 ¾ "
Lbs.
1.
Mounting Arm Assembly:
Your mounting system consists of three main parts,
an adjustable arm, a Tablet Holder and a clamp. First you will need to assemble
the 3 main parts. To attach the clamp to the arm, loosen the set screw on the
clamp (see Fig. 1). Next depress the Silver Spring loaded locking pin, then push
one of the ends of the mounting arm ( with the 3/8" threaded end into the clamp)
(see Fig. 2) Please Note: you need to line up the flat part of the Mounting Arm
end post with the set screw in the clamp. This will prevent the arm from
spinning freely inside the clamp. Once this is done you can tighten the setscrew
to lock the Mounting arm to the clamp.
Fig. 1
2.
Clamping Options:
Our mounting clamp is designed for mounting to tubular
(wheelchair, bedrail, walker, etc.) or flat surfaces such as a table top or desk. For
flat surface mounting use the included wedge insert shoe stored in front of the
locking knob on the clamp (see Fig.2)
Loosen locking knob slightly to remove
wedge, tighten knob once wedge has been removed.
Tighten
Clamp
Locking
Knob
