Use your switches!
Use your switches!
Use your switches!
Use your switches!
Connect your switches and control hundreds of compatible apps on your Bluetooth-equipped
iPad, iPhone, iPod Touch, MAC, PC or Android device. (A chart of switch accessible apps is
available free on our website.) This switch interface now has six modes for additional
functions: turn pages, control media such as iTunes, and control iOS cameras. Works through
Bluetooth 2.1 for simple pairing and has a range of over 50 feet. A lithium-ion battery
recharges through your USB port or USB AC charger (not included). Size: 2¼"W x 2¾"L x ½"H.
Weight: ½ lb.
OPERATION
OPERATION
OPERATION
OPERATION:
Setup & Paring:
Setup & Paring:
Setup & Paring:
Setup & Paring:
1.
Follow the included original manufactures instructions for turning your Bluetooth-equipped
iPad, iPhone, iPod Touch, MAC, PC or Android device. Example iPad Go to Settings,
General and set Bluetooth to On.
2.
Turn On the iPad Wireless switch by pressing the red power button and holding for 1
second. The LED will blink 3 times and attempt to pair with your iPad, blinking once every
second. (if you have used
(if you have used
(if you have used
(if you have used the iPad wireless Switch on another device you will need to
the iPad wireless Switch on another device you will need to
the iPad wireless Switch on another device you will need to
the iPad wireless Switch on another device you will need to
reset it in order for it to pair with you
reset it in order for it to pair with you
reset it in order for it to pair with you
reset it in order for it to pair with yourrrr new device)
new device)
new device)
new device). Please see operation No.4 for
Please see operation No.4 for
Please see operation No.4 for
Please see operation No.4 for
resetting instructions
resetting instructions
resetting instructions
resetting instructions. Once paired, it will blink once every two seconds. Your host iPad
may require validation to accept pairing from the iPad Wireless switch. If it requires a
code, use 0000 (four zeros). On the iPad, under the “Devices” heading within the
Bluetooth settings, you should see the iPad Wireless switch appears either as a keyboard,
or as “Enabling” with a serial number. Press On “Not Connected” to connect and complete
the pairing process. Once connected, the iPad Wireless switch will blink green once every
2 seconds.
Switch Use
Switch Use
Switch Use
Switch Use
3.
Activate the big button switch or plug any capability switch with the standard 1/8" switch
plug into Port 1-2 for single switch app use. Some switch friendly apps support two switch
use so a second switch can be plugged into port 3-4. Make sure your switch or switches
are plugged in all the way. There should be no gaps. Always consult your switch friendly
app for proper switch setup and use.
Resetting the Bluetooth Pairing
Resetting the Bluetooth Pairing
Resetting the Bluetooth Pairing
Resetting the Bluetooth Pairing
4.
To reset Bluetooth pairing on the iPad Wireless switch, turn the unit on. Press the red
power button and hold it for 8 seconds until you see a rapid succession of red and green
lights, then release. If pairing is unsuccessful, delete the device displayed on the iPad and
reset the iPad Wireless Interface pairing again. Initial discovery may take up to 30
seconds. To delete the iPad Wireless switch from the iPad’s Bluetooth Device listing, tap
the blue arrow button next to Enabling’s serial number and connection status text
(“Connected” or “Not Connected”), then press the “Forget this Device” button. Note:
Note:
Note:
Note: You
must reset pairing for both devices every time you change to a different device, such as
using it with two different iPads.
Page 1
Page 1
Page 1
Page 1
