Joerns
Hoyer 4-Point Adaptive Power Cradle
®
6
5. Safety Precautions
4
When fitted to the patient, the sling is connected to the 4 point cradle by using the Securi3 clip system
(step by step guide as follows). To remove, simply reverse this procedure.
SECURI3 CLIP SYSTEM
Pivot Handle
Fitting the Sling to the 4-Point Cradle
Oxford
®
Comfort Disposable
English
Fig. 9
1.
2.
3.
4.
1. Attach clip to lug
2. Pull plastic clip down to secure
3. Feed green ‘safe’ tab through slot
4. Sling is attached and ready to use
•
Before using your 4-point Adaptive Power Cradle ensure the quick release pin is FULLY
ENGAGED as shown in figure 6 and 7 on page 5.
•
The Hoyer 6-point spreader bar and the Hoyer 4-point Adaptive Power Cradle (power and
non-power) are only compatible with the Hoyer Presence and Stature lifts. Do not use this
cradle or spreader bar with any other manufacturer’s lift or slings.
•
When placing the cradle and sling in the most upright position do not leave the patient
unattended. The patient could slump forward in the sling, which could result in an injury to the
patient.
•
Do not use a sling unless it is recommended for use with the cradle/lift.
•
Always check that the sling is suitable for the particular patient and is of the correct size and
capacity.
•
Never use a sling that is frayed or damaged.
•
Always fit the sling according to the user instructions provided (sling user instructions).
•
Always plan your lifting operations before commencing.
•
Always check that your Hoyer 4-point Adaptive Power Cradle is in good working order prior
to any lifting operation.
•
Always use the 4-point Adaptive Power Cradle in a clean, dry and temperature controlled
indoor environment.
WARNING
!
