3.3.7 Restoring the Configuration Information
Click the <Browse> button, select previous backup file [* .cfg], click the <Recover> button. The
configuration information stored in the backup file will be restored to the device, this
configuration will take effect after the device automatically restarts.
3.3.8 Quit
Click the [Exit] menu item in the the navigation bar, return to the system status page, the login
box will be popped out automatically until the next click on the page.
4 W
EB
M
ANAGEMENT
G
UIDE
4.1 System Status
The specification meaning are shown in the chart below.
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
18
49
SPECIFICATIONS
DESCRIPTION
WORLD TIME ZONE
Displays the different time zones around the world. For example, select
“Automatically Adjust Daylight Savings Time” in the daylight savings time zone.
TIME
CONFIGURATION
You can select local time or use NTP
NTP SERVER
NTP is used when all the equipment clocks in the network have to be kept the same
so as to ensure the accuracy of the clocks. Enter the correct NTP server’s IP
Address to start the setup.
SYSTEM TIME
The current time of the device, if you did not get the NTP updated time,
then it will start to count from 0:00, 1970.
PC TIME
Computer’s current time
DEVICE NAME
Network identification device used to facilitate the integrated
management tools such as SNMP to judge different equipment.
CONTACTS
Equipment maintenance personnel’s contact information
CONTACT ADDRESS
Equipment maintenance personnel’s contact information
MAC ADDRESS
Hardware address of the device is unique since it is determined by the length of 48
bits (6 bytes), Hexadecimal digits.
HARDWARE,
SOFTWARE VERSION
Pay attention to software release limit for the hardware version. There are more
functions in the updated software version, some of which have new requirements
about hardware version.
RUNNING TIME
The time period equipment has been running since. When the device
is restarted, the time is recalculated.
