Enable-IT 820P Pro User Manual Download Page 2

 

All Rights Reserved 

1997 - 2013 Enable-IT, Inc.                                                                      Page 2 of 14

 

Copyright © 1997-2013 Enable-IT, Inc.  All rights reserved.  No part of this documentation 
may be reproduced in any form, or by any means, or used to make any derivative work 
(such as translation, transformation, or adaptation) without written permission from 
Enable-IT, Inc. 
 
Enable-IT, Inc. reserves the right to revise this documentation and to make changes in 
content from time to time without obligation on the part of Enable-IT, Inc., to provide 
notification of such revision or change. 
 
Enable-IT, Inc. provides this documentation without warranty, term, or condition of any 
kind, either implied or expressed, including, but not limited to, the implied warranties, 
terms or conditions of merchantability, satisfactory quality, and fitness for a particular 
purpose.  Enable-IT, Inc. may make improvements or changes in the product(s) and/or 
the program(s) described in this documentation at any time. 
 
If there is any software on removable media described in this documentation it can be 
provided on request.  Please contact Enable-IT, Inc. and a copy will be provided to you. 
 
 
UNITED STATES GOVERNMENT LEGEND 
If you are a United States government agency, then this documentation and the software 
described herein are provided to you subject to the following: 
 
All technical data and computer software are commercial in nature and developed solely 
at private expense.  Software is delivered as "Commercial Computer Software" as defined 
in DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101 
(a) and as such is provided with only such rights as are provided in Enable-IT, Inc.'s 
standard commercial license for the software/firmware. 
 
Technical data is provided with limited rights only as provided in DFAR 252.227-7015 
(Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable.  You agree not to 
remove or deface any portion of any legend provided on any licensed program or 
documentation contained in, or delivered to you in conjunction with, this User Manual. 
 
Unless otherwise indicated, Enable-IT, Inc. registered trademarks are registered in the 
United States and may, or may not, be registered in other countries 
 

 

 

Summary of Contents for 820P Pro















Reviews: