Changing the Voice Speed
You can change the voice speed by pressing and holding the
Next
or
Previous
Button
for about 3 seconds. You will be prompted to adjust the voice to the
desired speed using the
Next
or
Previous Buttons
. Once you have found your
preferred speed, press the
Read Button
to set. The selected voice speed will be
saved even after the device is powered off.
Spell Mode
If you have trouble understanding a word or wish to have the spoken information
spelled out for you, you can use the Spell Mode feature. This is enabled by
selecting the last or slowest step in the voice speed adjustment. Press and hold the
Next
or
Previous Button
for about 3 seconds until you are prompted to change
the voice speed. Then press the
Next
or down arrow button until you hear “Spell
Mode”, then press the
Read Button
to select. You can then scan your prescription
and hear the information spelled out. To cancel this function, follow the steps to
reset the voice to your desired speed.
Operating With Batteries
ScripTalk Station can be operated with 2 AA (1.5V) batteries.
Low Battery Indication
If the batteries get low, the unit will voice out a Low-Battery indicator whenever the
Read Button
is pressed. This prompt indicates that the batteries need to be
replaced.
4.4
4.5
4.6
4.7
Summary of Contents for Scrip Talk Station
Page 1: ...V 1 3...
Page 10: ......
