En-Vision Scrip Talk Station, User Manual

Page: 6 / 10

the prescription, the speed of the beeps will increase. The pill bottle should not
be moved away until the reader begins speaking the prescription information.
If a prescription label is identified, ScripTalk Station will begin speaking the
prescription information in its entirety. When finished, it sounds a double beep.
Canceling a Scan
To cancel or end the speaking of a prescription label, simply press the Read
Button . The voice will stop and you will hear two beeps.
Manually Scrolling Through Prescription Information
While the device is speaking your prescription details, you can press the Previous
or Next Button to move through the previous and next items of information. By
using this manual mode, any specific part of the prescription can be read out as
required, as many times as needed.
Once ScripTalk Station reaches the first field, it repeats the same item if Previous
Button is pressed. Similarly, once the last field is reached, it repeats the same
item if Next Button is pressed.
Manual Time Out
After ScripTalk Station is done voicing out the prescription details, the device goes
into sleep mode. (Please note: Information for that prescription is held in memory
for only 30 seconds.)
Multiple Prescriptions Detected
You should only present one prescription at a time for ScripTalk Station to read.
If more than one ScripTalk prescription is identified during a read, a verbal warning
is given.