30 / 42
Clicking the upper green triangle and without release the mouse button you
can displace the area where you want
To increase or decrease the dead zone area, click and hold with the left button of
mouse on either of lower triangles and move it to the desired position and release the
button to finish. Both lower triangles will move symmetrically with respect to the upper
triangle.
Clicking on either of lower green triangles and without release the mouse
button you can increase or decrease the dead zone area
When the dead zone adjust is finished, click the
SAVE
button to save the new adjust
configuration or click
CANCEL
to restore the previous adjust.
Manually configure Raw Axes
From v1.09 of RealSimulator HID Device Tool is possible see and adjust manually
each parameter associated to the raw axes progress bars, as Max, Min and Dead
Zones.
To see a parameter value you must put the mouse over the parameter icon and the
measure will be showed for 4 second below the raw axis name. After this time the
measure value disappears and will be necessary to move the mouse and put again
over the icon to see it again.