EMX Industries, Inc.
Tech support: 216-834-0761
1/5
CS202_Rev1.6_070119 [email protected]
CarSense 202
Vehicle Motion Detector
Instruction Manual
The CarSense 202 is a compact, single-piece, vehicle motion detector that operates by detecting
changes in the e
arth’s magnetic field that occur near the probe
with a fixed detection range of 12ft. at
a vehicle speed of 5 mph. The CS202 will only detect a moving vehicle and will not detect a stationary
vehicle. The CS202 may be used as a free exit sensor to allow gates to open and guests to exit without
the use of a key fob or passcode. The CS202 may also be wired to notify a home automation system or
security system that a vehicle is moving down a driveway. This vehicle motion detector is available in
50, 100, or 150ft. lead lengths.
The CS202 is designed to detect moving vehicles. It is not suitable for use as a vehicle
presence detector such as a reversing loop for a gate or door.
The CS202 detects ferrous metals. It will not detect aluminum but will detect any
moving ferrous metallic object.
The probe must be stationary to function properly.
Cautions and Warnings
Power
9 - 41VDC or 6 - 29VAC
Standby current
0.250mA
Detection current
12mA
Range sensitivity
12ft. @ 5 mph min. speed
Output on time
Approximately 1 second
Surge protection
Probe input circuitry protected by surge suppressors
Relay output configuration
Form C (SPDT)
Relay contact rating
1A @ 24VDC 1A @ 120VAC
Operating temperature
-40º to 82ºC (-40º to 180ºF) 0 to 95% relative humidity
Probe housing material
PVC watertight
Probe dimensions (L x Dia.)
24
” (
610
mm) x 1” (25
mm)
Probe cable
5-wire, direct burial
Specifications
TM
