EBM-B100 User’s Manual www.emw.co.kr
15
4.1.4 LED State Display
Figure 4-4. LEDs
No.
LED
Description
1
Sync
The master and slaves have been joined normally and
the network configuration has been completed.
2
Slave
The device works as slave.
3
Master
The device works as master.
4
Power
Power connection.
4.1.5 Reset S/W
- Used to reset hardware and re-boot the device.
- Used to update the firmware through the USB port (dedicated GUI is needed)
* Note: The device settings can be initialized only by the setup program, and not the
Reset button (see 4.2.5, “Factory Reset”).
①
②
③
④
Reset S/W
