Novell NetWare 3-17
5)
At Server>
,
enter su:
>
Server> su
This gives you supervisor status.
6)
At Password>, enter system:
>
Password> system
System is the default privileged password which does not echo back.
7)
Change terminal emulation mode to ANSI.
>
Server>> change port type ANSI
8)
At the Server>> prompt, view or change current parameters.
Refer to the list of commands in the
Command Reference Guide
.
9)
Log out of the printer server:
>
Server>> logout
Configure Specific NetWare Parameters
IMPORTANT: This section contains advanced features.
All parameters should be configured by the
Network Administrator.
Add NetWare Password to Printer Server
A single password will be used for login to both bindery and NDS systems.
When defining a password on the NetWare file server, the password must be
entered in the printer server.
1)
Login to the printer server with supervisor privilege.
2)
Enter:
>
Server>> define server netware password
3)
When prompted for the password, enter the eight-character NetWare file
server password defined in PCONSOLE.
