LPe11004 Hardware Installation Manual
Page 4
To attach media to the HBA:
1. Connect the fiber optic cable to the LC connectors on the HBA.
Figure 3: Connecting the optical cable
2. Connect the other end of the cable to the Fibre Channel device.
After the media is connected to the HBA, you are ready to apply power to the computer.
Applying Power
To apply power:
1. Verify that the HBA is securely installed in the computer.
2. Verify that the correct media is attached.
3. Plug in and turn on the computer.
4. Observe LEDs for Power On Self Test (POST) results.
Viewing the LEDs
Each port has a set of green and yellow LEDs, visible through openings in the HBA's mounting
bracket.Green means firmware operation and yellow means port activity.
Figure 4: Port LEDs
Port 0 LEDs
Port 1 LEDs
Port 2 LEDs
Port 3 LEDs
