background image

LPe11004  Hardware Installation Manual

Page 2

 

Copyright © 2008 Emulex. All rights reserved worldwide. No part of this document may be reproduced by any 
means or translated to any electronic medium without the prior written consent of Emulex.

Information furnished by Emulex is believed to be accurate and reliable. However, no responsibility is assumed by 
Emulex for its use; or for any infringements of patents or other rights of third parties which may result from its use. 
No license is granted by implication or otherwise under any patent, copyright or related rights of Emulex.

Emulex, AutoPilot Installer, BlockGuard, cLAN, FabricStream, FibreSpy, Giganet, HBAnyware, InSpeed, IntraLink, 
LightPulse, MultiPulse, SAN Insite, SBOD and Vixel are registered trademarks, and AutoPilot Manager, Critical  
Connectivity  Solutions, EZPilot, SLI and VMPilot are trademarks of Emulex. All other brand or product names 
referenced herein are trademarks or registered trademarks of their respective companies or organizations.

Emulex provides this manual “as is” without any warranty of any kind, either expressed or implied, including but not 
limited to the implied warranties of merchantability or fitness for a particular purpose. Emulex may make 
improvements and changes to the product described in this manual at any time and without any notice. Emulex 
assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties that may 
result. Periodic changes are made to information contained herein; although these changes will be incorporated into 
new editions of this manual, Emulex disclaims any undertaking to give notice of such changes.

Emulex, 3333 Susan Street

Costa Mesa, CA 92626

Summary of Contents for LPe11004 HBA
















Reviews: