Install Host Bus Adapter Board
Record IEEE address and serial number.
Each host adapter is shipped with a unique address identifier called the
IEEE address. The Fibre Channel industry uses a World Wide Name
(WWN) derived from the IEEE address, and this number is need for
arbitrated loop connectivity. The serial number is used when
communicating with Emulex. Both numbers are clearly marked on the
board. We recommend that you record these numbers before installation.
1.
Turn off and unplug the computer.
2.
Remove the computer case.
3.
Remove the blank panel from an empty 32− or 64−bit PCI bus slot.
4.
Insert host adapter board into the empty 32− or 64−bit PCI bus slot.
Press firmly until the board is seated.
5.
Secure the host adapter's mounting bracket to the case with the panel
screw.
6.
Replace the computer case and tighten case screws.
7.
The host adapter is now installed in the PC and is ready for media attachment.
Emulex Drivers, Software and Manuals
5
