I
N
S
PEED
™ SAN S
TORAGE
S
WITCH
M
ODEL
355
C
HAPTER
3 S
WITCH
M
ANAGEMENT
U
SER
’
S
G
UIDE
26
Adjusting the Switch Thresholds
The Switch Thresholds page displays a variety of switch threshold settings.
To view the current threshold settings:
Click
Advanced Functions > Thresholds > Switch
.
The Switch Thresholds page appears.
To change switch thresholds or time intervals:
1.
Enter the new value in the appropriate text box.
The valid range is displayed next to the text box.
2.
Click
Submit
.
The new value is set.
Setting
Description
Ordered Set Error Threshold
The maximum number of OS errors allowed in a 10-second interval
before a port is bypassed. Setting this value to "0" returns it to the
factory default setting.
This setting is activated on the Port Smart Settings page.
CRC Error Threshold
The maximum number of CRC errors allowed in a 10-second interval
before a port is bypassed. Setting this value to "0" returns it to the
factory default setting.
This setting is activated on the Port Smart Settings page.
Bad Zone Recovery Hold Time
(measured in centi-seconds)
The amount of time that the switch keeps the ports in bypass mode
before attempting to re-insert the ports into the zone.
This setting is activated on the Advanced Functions One-Step Zoning
page.
Bad Zone Recovery Delay Time
(measured in seconds)
The amount of time that the switch waits after a zone goes down before
attempting to recover the zone.
This setting is activated on the Advanced Functions One-Step Zoning
page.
Port Utilization Interval
(measured in seconds)
The length of time between readings of the current port’s utilization.
Figure 3-7: Switch Thresholds page
