Speedsynchro
®
Modular/NFC
Operating instruction edition: 01.09.2022 19
3 Readout operating data via NFC interface
The operating data is recorded and stored by the electronics integrated in the
Speedsynchro
Modular/NFC. The readout of data is done via an NFC-enabled
smartphone.
The required app can be downloaded free of charge for iOS from Apple store or for
Android operating systems from Google Play Store.
3.1 Speedsynchro
- Electronics
The electronics of the Speedsynchro
system are embedded and protected under the
cover, the NFC readout antenna is integrated inside. Depending on the operating
condition, the electronics are in active or in energy saving mode.
Power is supplied by a battery integrated in the Speedsynchro
Modular/NFC, the
battery charge state can be read via NFC. The battery has a service life of several
years and is easy replaceable. The operating data is not lost when the battery is
changed.
3.2 Readout operating data
The operating data is read out via wireless coupling of smartphone and
Speedsynchro
antenna. The antenna is located under the cover. The position of the
antenna in the smartphone depends on manufacturer and model.
For coupling and reading the operating data, it is sufficient to move the back of the
smartphone in direct contact or within a few millimeters over the cover.
Depending on the smartphone model, the EMUGE app opens automatically and the
operating data can be read. If the app does not open automatically, it must be opened
manually before coupling the devices.
Picture 4
