HE
8
Operating instruction edition: 01.02.2017
2 Putting the quick-change adapters into operation
2.1 Unpacking
-
Take the quick-change adapter from the plastic case.
-
Clean the quick-change adapter with a duster to remove any conservation oil.
Note
Do not use any aggressive solvents.
Do not use fibrous materials i.e. steel wool.
The quick-change adapter is now ready for operation
2.2 Insert tool
2.2.1 Insert tap / cold-forming tap
Attention
Choose the appropriate quick-change adapter for the required tap/cold-forming tap!
Note
Required tool:
Type HE 2: Hexagon socket wrench: width across flats 4
Type HE 3: Hexagon socket wrench: width across flats 5
1. Push tap/cold-forming tap
into the quick-change
adapter.
Note
Bring the square into the
correct position by
turning the tap/cold-
forming tap.
√
Tap/cold-forming tap
Screws for tightening the tap/cold-forming tap
Quick-change adapter
