HE
10
Operating instruction edition: 01.02.2017
2.3 Detach tool
2.3.1 Detach tap / cold-forming tap
Note
Required tool:
Type HE 2: Hexagon socket wrench: width across flats 4
Type HE 3: Hexagon socket wrench: width across flats 5
1. Loosen all three
screws
2. Pull out tap/cold-
forming tap
2.3.2 Detach drill or countersink
Note
Required tool:
Drift punch
Hammer
Use hammer and
drift punch to drive
out drill or
countersink
Tap/cold-forming tap
Quick-change adapter
Screws for tightening the tap/cold-forming tap
Hammer
Countersink
Drift punch
drift
Quick-change adapter
