Configuration
Copyright © 2010 by EMTrust GmbH All rights reserved
User Manual - CP75X
74
Rear Parallel Port
Please select the base address and interrupt for Rear
Parallel Port or disable it.
These I/O address/Interrupt combinations are possible:
[378/IRQ5], [278/IRQ5] or [3BC/IRQ5]
The default setting is [278/IRQ5].
The recommended setting is [278/IRQ5].
Parallel Port Mode
The default setting is [SPP].
These port modes are possible: [SPP], [EPP], [ECP],
[ECP+EPP] or [Normal]. Choose the preferred mode for
your application.
EPP Mode Select
If EPP Mode is selected, the mode can be set to [EPP1.9]
or [EPP1.7]. The default setting is [EPP1.7].
ECP Mode Use DMA
If ECP Mode is selected, the DMA channel can be set to
[1] or [3]. The default setting is [3].
PS/2 KB/MS input select (Only with KBC
supporting BIOS)
If the BIOS has Key Board Controller-support (KBC-
support), the PS/2 keyboard and mouse input can be set
to [Front] or [RearIO]. The default setting is [Front].
