EMTRON TOYOTA/SUBARU GT86/BRZ/FR-S PLUGIN USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD
7
ECU Channel - Analog Inputs
Function
Analog Voltage 1
MAP
Analog Voltage 2
DBW 1 Servo Position Main
Analog Voltage 3
DBW 1 Servo Position Sub
Analog Voltage 4
MAF
Analog Voltage 5
Rear O2 Sensor
Analog Voltage 6
IO Expansion Loom
(e.g. Fuel Pressure)
Analog Voltage 7 (Pull-up Channel)
Engine Temperature
Analog Voltage 8 (Pull-up Channel)
IO Expansion Loom
(IAT/FTemp/FPressure
Analog Voltage 9 (Pull-up Channel)
IO Expansion Loom
(IAT/FTemp/FPressure
Analog Voltage 10 (Pull-up Channel)
IO Expansion Loom
(IAT/FTemp/FPressure)
Analog Voltage 11 (Pull-up Channel)
Intake Temperature MAF
Analog Voltage 12 (Pull-up Channel)
Engine Oil Temperature
Analog Voltage 13
Pedal Position Sensor (PPS) Main
Analog Voltage 14
Pedal Position Sensor (PPS) Sub
NOTE:
Analog Voltage Channels 7-12 have switchable pull-ups which are suitable for
temperature measurement.
ECU Channel - Digital Inputs
Function
Digital Input 1
Cam Position - Inlet RH
Digital Input 2
Cam Position - Exhaust LH
Digital Input 3
Cam Position
–
Exhaust RH
Digital Input 4
Neutral Position Switch
Digital Input 5
Direct Injection 1 Feedback
Digital Input 6
IO Expansion Loom
(e.g. Ethanol Sensor)
Digital Input 7
Direct Injection 2 Feedback
Digital Input 8
DI Fuel Pump Feedback
Digital Input 9
Clutch Switch
Digital Input 10
Start Signal from Starter Relay (Button Start)
NC (Key Start)
Digital Input 11
AC Pressure (some models only)
Digital Input 12
Start/Stop Switch (Button Start)
Start Signal from Starter Relay (Key Start)
Digital Input 13
Brake Switch
Digital Input 14
Cruise Control Switch