EMTRON TOYOTA/SUBARU GT86/BRZ/FR-S PLUGIN USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD
4
3.0 Kit Contents
When purchasing a Toyota/Subaru GT86/BRZ/FR-S plug-in the following items are included:
▪
GT86/BRZ/FR-s Plug-in ECU
▪
DTM 12 way Female Connector and pin kit
3.1 Expansion Loom
The ECU's Input capabilities can be expanded using the expansion connection which is a
male DTM 12 Way (DT06-12SA) See Table 3.0 and Figure 3.1
These additional inputs can be connected to any sensor, but the recommended sensors are
indicated in brackets.
Pin Number
Function
1
Analog Sensor 0V Reference
2
5.0V Aux Supply
3
AN 8 (e.g. Fuel Temp or Inlet Temp)
4
AN 9 (e.g. Fuel Temp or Inlet Temp)
5
AN 10 (e.g. Fuel Pressure)
6
DI 6 (e.g. Ethanol Content Sensor)
7
14V Out Protected (ELC1 Power Supply)
8
Ground (ELC1 Ground)
9
Auxiliary Output 5 (e.g. Boost Control solenoid)
10
NC
11
CAN 1 Hi
12
CAN 1 Lo
Table 3.0 - Expansion Port Pin out
To minimise signal contamination and maximise noise immunity, it is recommended to
twist the CAN wire pairs at a minimum one twist per 40mm of cable:
Pair 1
Pair 2
CAN High
<------->
CAN Low