AMETEK CTS
VDS 200Q10 Series
Manual for Operation
V 1.00
29 / 35
5.
Maintenance
5.1. General
The generator is absolutely maintenance-free by using a solid state semiconductor switch to generate the fast
transients.
5.2. Test set-up
When setting up the test national and international regulations regarding human safety have to be guaranteed.
The test setup must conform to the national and international regulations.
The generators of the series 200, UCS, LD, PFS, VDS and AutoWave, can be linked together to a fully
automotive test set-up.
The set-up communicates via the IEEE/GPIB bus and is controlled by ISM ISO software. For setting up the
system see the following figures:
Each generator can be operated individual as single equipment.
5.3. Test set-up with software iso.control
By using iso.control software:
•
Connect the VDS 200Q10.x to a computer running iso.control via GPIB or USB
By using autowave.control software
•
Connect the VDS 200Q10.x to a computer running autowave.control via GIPB or USB
