2
English
Step 4C: Fasten Latch using two #8 x 3/4” wood screws.
Fasten Strike Plate using two #8 x 3/4” wood screws.
Step 4B: Insert the latch through the alignment tool.
1. Door Prep
4. Install Latch
23/8” or 23/4”
Backset
21/8” Diameter
Bore
1/8” Deep
21/4”
1”
1” Diameter Edge Bore
Step 4A: Place Plastic Alignment tool in bore hole.
Alignment Tool
Privacy Function: the
threaded hole for the
privacy pin must be
facing the interior side
of the door.
Rotate the nose bolt so that the curved face
will hit the strike plate when closing the door.
!
A
B
C
13/8”
11/4”
21/4”
11/2”
15/16”
21/4”
13/4”
17/16”
21/4”
NOTE: Dimensions B & C
should be used as reference
only. Due to tolerances
actual door jamb prep
dimensions will vary. Using
Door Thickness (A)
2. Standard Strike Plate Door Jamb Prep
3. Install Strike Plate
B
C
1.250
1.125
A
DRILL 1/8”
PILOT HOLES
the strike plate
outline edges and
locate screw holes
on strike with center
line on jamb.
1/8" DEEP
13/16" DEEP
