8
Charger
The charger connects the mini-S3 Receiver to a power source so the battery can be
re-charged. The mini-USB plug of the charging cord connects to the mini-S3 via
the power jack while the large end of the charger connects to the power source.
The mini-S3 may be used while plugged into a power source while charging.
CAUTION:
Use only EMTAC branded chargers with the mini-S3 to charge
the receiver.
WARNING:
Use of other chargers can result in failure of the unit and/or
its lithium-ion battery.
Battery
The mini-S3 contains a removable, rechargeable Lithium-ion battery which supplies
the power for the operation of the GPS and Bluetooth circuits inside the receiver. It
is a low consumption battery with a minimum of 8 hours of continuous use after
fully charged. The battery can be recharged using the EMTAC branded charger
which came with the mini-S3. The mini-S3 may be used while the battery is being
charged.
To remove the battery, slide the battery cover away from the device, then remove
the battery.
CAUTION:
Use only EMTAC branded chargers with the mini-S3 to charge
the receiver.
WARNING:
Use of other chargers can result in failure of the unit and/or
its lithium-ion battery.
WARNING:
Do not open the unit other than to replace the battery. There
are no serviceable parts inside.
WARNING:
Exposure to temperatures greater than 60°C (140°F) will
damage the battery and poses a risk of explosion.
See WARNINGS on pages 22 - 23 for more extensive safety information on
the battery.
