Cable Modem User’s Manual
New Channel:
There are 11 channels that you can choose. Choose
the one that is suitable for this device.
Current Channel:
The channel that you choose will be displayed in this
field.
Network Authentication:
It shows the status of the network authentication. For
the basic settings, there is no network authentication
adapted.
Data Encryption Mode:
It shows the data encryption mode. For the basic
settings, there is no data encryption mode selected.
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
-
-
D
D
i
i
s
s
a
a
b
b
l
l
e
e
d
d
For the disabled network Authentication, the settings
that you can adjust including Data Encryption, Shard
Key Authentication, PassPhrase, Network Key 1-4
and Current Network Key.
Data encryption:
Select the WEP mode for the WEP key function. You
can choose
64-bit
or
128-bit
for your necessity. If
you choose
Off
, the Encryption Keys will not be
shown on this page. If selected, data is encrypted
using the key before being transmitted. For example,
if you set 128-bit in this field, then the receiving
station must be set to use 128 Bit Encryption, and
have the same Key value too. Otherwise, it will not
be able to decrypt the data.
Shard Key Authentication:
The ADSL Router supports two authentication types:
Open System
or
Shared key, and Shared Key
. This
should be considered with the WEP (Wired
Equivalent Privacy) mechanism.
PassPhrase:
You can type in ASCII codes into this field. The
range is from 8 characters to 64 characters.
For
ASCII characters, you can type in 63 characters
in this field. If you want to type in 64 characters,
only hexadecimal characters can be used.
Generate WEP Keys:
Click this button to generate the PassPhrase.
Network Key 1 to 4:
12