Manual-EMT-PRO-Tonearm
9/13
Lifting device
Your tonearm features an integrated lifting device. It can be removed if the
turntable’s lifiting device shall be used.
The lifting device is preset for standard purposes in the factory. The
following parameters can be modified or readjusted by the user.
Resting Position
- Release the slotted screw (1), which is accesable from underneath.
- Set the resting position by turning the complete lifting device ±15°.
- Tighten the slotted screw (1) gain.
Removing Device
- Remove the slotted screw (1).
- Remove the complete lifting device.
Vertical and axial position
- Choose the hex key wrench 1,5mm from the accessories box.
- Release the hexagon screw (2).
- Move the lift-cylinder in the correct vertical and axial position.
- Carefully tighten the hexagon screw (2) again.
Tighten lift-support
- Choose the hex key wrench 1,3mm from the accessories box.
- Insert the hex key wrench thru the hole of the holding-clip.
- Carefully tighten the countersunk screw (3).
- Remove the hex key wrench again.
1
2
3