Manual-EMT-PRO-Tonearm
11/13
Setting the Vertical Position
For precise adjustment of the vertical tracking angle, your tonearm features
a mechanism to set the vertical position.
Correct setting is achieved when the tonearm is in absolute horizontal
position while the stylus is tracking a record-groove. To compensate for
tolerances of your cartridge, minor deviation from the horizontal position
could be required. Please ask your dealer for further information.
1.
Use the 2mm Hex key wrench to release the retaining-screw (1) for
half a turn.
2.
Adjsut the vertical position
- Turn the VTA-Ring (2) clockwise to increase the height
- Turn the VTA-Ring (2) anticlockwise to decrease height
3.
Tighten the retaining-screw (1) again.
Gently tighten the VTA-Ring (2) towards the
Base-Ring
(3).
1
2
3