18
1. Check Battery:
Proceed to insert battery pack into the battery compartment. BE SURE TO MATCH THE
POSITIVE AND NEGATIVE ENDS OF THE BATTERY PACK TO THE MARKINGS IN THE
BATTERY COMPARTMENT OF THE UNIT.
NOTE:
Before first and consequent uses, charge battery using the supplied battery charger.
To charge: Plug male end of charger to the socket located on the right side of the LCD screen.
Make sure the plug fits snugly into the socket. PERMANENT DAMAGE MAY OCCUR IF FORCE IS
USED TO PLUG THE MALE END OF THE CHARGER INTO THE SOCKET. A green indicator
light will illuminate and alternately flash as it is being charged. If red or flashing red, check battery for
proper placement. If not solved, call customer serviec. When charging is done (usually 3-4 hours
on a fully discharged battery), a green steady light will illuminate. Typical charge may last several hours of
use depending on frequency and intensity of treatment.
NOTE:
The device will NOT work if the charger is plugged into the device. Nor will the device work if
the charger plug is plugged into an outlet. Use of unapproved charger (not issued by EMSI) may cause
damage to device and will void any warranty.
The Specifications of Charger:
Input: AC 110V, 50~60Hz, 0.2A
Output: DC 4.8V, 400mA
11.0
| Instructions For Use
NOTE:
Always read this instruction manual before use.
PREPARATION FOR USE
Summary of Contents for FLEX-MT PLUS
