EMS TAM-242 Installation And Operating Manual Download Page 20 | Manualshive

Page: 20 / 23

background image

Specifications

TAM-242/252/262 Installation and Operating Manual

This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd a nd EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permiss ion of EMS Global Tracking.

14 of 17

© 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd.

MAN-0059 Issue 4

Approvals and Certification

1999/5/EC including 2004/108/EC EMC and 2006/95/EC LVD

Relevant Standards:

EN301 489-20 v1.2.1 (2002-11)

EMC Testing

EN 60950:2000

Electrical Safety (R&TTE)

ETSI EN 301 426 v1.2.1 (2001-10)

Radio Approval

Ingress Protection:

EN60529 :1999 classification IP66

Inmarsat Type Approved (Inmarsat Certificate Number DST005)

The product complies with FCC requirements:

FCC 25.216

FCC 25.202

OET bulletin 65

«
...
18
19
20
21
22
...
»

Summary of Contents for TAM-242
























Reviews:

No comments

Related manuals for TAM-242

Brand: Panasonic Pages: 4

Brand: Gemini Pages: 7

Brand: Nady Systems Pages: 10

Brand: LINK-MI Pages: 28

Brand: Sony Pages: 2

Brand: Sony Pages: 27

Brand: Sony Pages: 72

Brand: Sony Pages: 58

Brand: Okayo Pages: 16

Brand: MXL Pages: 2

Brand: AKG Pages: 24

SR 40 DIVERSITY

Brand: AKG Pages: 48

Brand: AKG Pages: 60

Brand: AKG Pages: 100

RS27116I - Vertical-Loading CD System

Brand: RCA Pages: 2

Brand: THOMSON Pages: 23

Brand: TAG Heuer Pages: 8

Brand: Void Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands